Blinksmart®by Sapience AutomataBook a demo

One visit per site. Fit, test, train.

A vehicle only counts as installed when it passes our 9-point check and the fleet owner signs the handover sheet.

Plan an installation

  1. Prepare

    We agree the vehicles, routes and depot, book a date, set up your fleet account and collect the driver list.

  2. Survey and install

    Each vehicle's power point, camera position, GPS and modem location is checked, then everything is fitted in a fixed order.

  3. Bring online and QC

    Every vehicle is registered and its drivers authorised, then it must pass a 9-point check before we leave.

  4. Train and sign off

    Every driver is trained, your managers learn the daily routine, and you sign the handover sheet.

The 9-point check on every vehicle

Our installer works through this list before leaving the depot. If any item fails, the vehicle isn't handed over.

  • Power stable; device turns on
  • Camera sees the driver's whole face
  • GPS received; Live Location shows the vehicle
  • Modem on the network with mobile data
  • Data visible on the dashboard
  • Driver Recognition identifies the driver
  • Test alert beeps and shows in the APS Feed
  • Cables secured; nothing loose
  • Device ID, SIM number and photos recorded

What our installer brings

Spare GPS, cable and SIM come along for swap tests, so most faults are fixed on the same visit.

  • Blinksmart camera device, QA-tested before dispatch
  • Wiring harness and connector cable
  • GPS module and cable
  • DC converter
  • Modem with an active SIM
  • Mounts, cable ties and tape
  • Multimeter for power checks
  • Known-good GPS, cable and SIM for swap tests
  • Printed Driver Guide for every driver

Training and handover

Drivers

Every driver is taken through the Driver Guide on the day of installation and keeps a printed copy.

Managers

Managers get their own logins and learn the daily routine, including what to do when a NoFace or Device Inactive alert comes in.

Owner

The owner is briefed on responsibilities and warranty, then signs the Site Handover Checklist with our installer.

When something needs fixing

  1. Fleet manager

    Checks whether the vehicle moved, then device power, modem, SIM and a clear camera.

  2. Partner or installer

    Visits the site, swap-tests with known-good parts and re-runs the QC check.

  3. Blinksmart support

    Diagnoses remotely and approves replacements.

Keeping it working

  • Every weekWipe the lens with a soft, dry cloth. No chemicals.
  • Every weekCheck that no vehicle shows Device Inactive while it has been driving.
  • At every serviceCheck cables, connectors and mounts are secure and undamaged.
  • After garage workRe-run the 9-point QC check.

Ready to fit your fleet?

Tell us how many vehicles and where they're based, and we'll plan the visit.

Book a demo